Coking Coal Crusher

Coking coal is a kind of bituminous coal. Compared with other types of bituminous coal, coking coal has the advantages of high degree of coalification, good coking property, low volatilization and strong caking. Coking coal has become an important raw material for coking because of its strong caking ability and the ability to extract high quality coke with high strength, high speed and less cracks.

Coking coal crusher is a kind of vertical structure crusher equipment, also known as the raw coal crusher. It can be used for primary, intermediate and advanced crushing of raw coal, coal, wet coal and coal block with the advantages of high crushing efficiency, no clogging, flexible operation and so on. Coke coal crusher has two sets of rotors, also known as double rotor hammer crusher, two-stage crusher and coal gangue crusher. This equipment is through the continuous cycle hammering of two sets of rotors to crush coal, coal gangue, coal block and other materials. Because the grate bar device is not installed in the whole machine, there will not be clogging and bonding, when discharging the materials. Especially when the wet coal is broken, can show its advantages.

Technical Parameters of Coking Coal Crusher: Standards; Production Capacities; Powers of Motor

ZPCΦ600×600; 20-30 t/h; 22kw×2

ZPCΦ800×600; 35-55 t/h; 45kw+22kw

ZPCΦ1000×800; 60-90 t/h; 55kw+55kw

ZPCΦ1200×1000; 80-120 t/h; 90kw+75kw

ZPCΦ1400×1200; 100-140 t/h; 132kw+75kw

ZPCΦ1600×1400; 120-180 t/h; 160kw+90kw

Technical advantages of coking coal Crusher:

1. Double stage rotors start working at the same time, crushing more fully: The coking coal crusher is equipped with two sets of rotors and two sets of rotors start at the same time. The upper rotors are in charge of the initial crushing, and the lower ones are responsible for the fine crushing, to ensure that the crushing is more thorough, and that there is no over-crushing.

2. Without screen at the bottom of the screen, it is easy to crush high humidity materials: In the process of coking coal crusher, there is no phenomenon of material paste blocking sieve plate, especially to crush high humidity materials, which reduces the failure rate of hammer head and fuselage and improves the safety of the whole machine.

3. The hydraulic starting mode is flexible and convenient: The coking coal crusher adopts the advanced hydraulic and electric starting shell, which is convenient to start, and can be started easily by only one person. It can effectively reduce the cost of manual management. The integration of hydraulic mode also makes maintenance more convenient, saving time and labor.

4. Rotor can be used repeatedly, saving cost: The hammer head of the coking coal crusher is made of the more wear-resistant high chromium alloy, and the unique technology of shifting and adjusting the gap is used to realize the repeated use of the hammer head. When wear is serious, you just need to replace the hammer head, not the hammer handle.

5. It is equipped with a wear-resistant protective liner to reduce the wear of the body: The machine is divided into upper and lower cavities, and the inner wall of the whole body is equipped with advanced wear-resistant protective linings to avoid the wear and deformation inside the body, thus greatly prolonging the service life of the whole machine.

Two rotors can crush coking coal more fully at the same time. The crushing effect of coke crusher for coking coal, wet coal, raw coal, coal block and other materials has been recognized by many users. Because of the diversified demand of users and the increase of suppliers, the configuration and quotation of coal crusher are more flexible. If you want to know the quotation and configuration details of coking coal crusher, please consult our technical staff!